590SU
Product highlights
- Shaftless pick up from floor.
- Removes creases from film products before slitting.
- Ultrasonic end of roll detector.
- Up to 1700mm web width (2000mm with rewind shaft supports).
- Touch screen control with job data memory recall system.
Optional equipment
- Oscillating Trim Winders
- Automatic knife positioning
- Laser core positioning (incorporated in operator touch screen)
- Finished roll push off and unload to floor system
|
Specification
Unwind
| Unwind type: |
Shaftless pick up from floor |
| Maximum web width: |
Up to 1700mm (2000mm with rewind shaft
supports) |
| Maximum roll diameter: |
Nominal 1000mm (optional 1500mm) |
| Minimum web width: |
300mm |
| Maximum roll weight: |
1000Kg. (2000Kg @ 1500mm) |
| Core loading: |
Combined 76mm & 152mm chuck |
| Tension control: |
Driven via dancer arm |
| Tension range: |
0.5 – 5Newtons / cm |
| Guider: |
Fife CDP01 hydraulic type |
| Guider travel: |
+/- 75mm |
| Cam roller: |
Parent roll slack edge control |
| Spreader roller: |
Removes creases from film products before
slitting |
| Ultrasonic end of roll
detector: |
Programmable end of roll sensor via operator
touch screen |
Operator unwind controls
| Controlled stop button: |
Fitted to main guard |
| Material support arms
in/out |
Buttons fitted to both arms |
| Material support arms
up/down |
Buttons fitted to both arms |
| Emergency stop button |
Fitted to main guard |
| FIFE guider controls |
Fitted to main guard |
Main drive
| Main drive motor: |
7.5Kw A/C Vector type |
| Drive rollers: |
Dual "S" wrap 150mm diameter
rubber covered rollers |
| Maximum machine speed: |
600m/min |
| Length counter: |
PLC controlled automatic stop at length
(No crawl speed input required) |
Slitting section
| Slitting type: |
Dovetail mount semi-automatic rack and
pinion male knife system |
| Slitting types available: |
Rotary shear/Tangential rotary shear/Razor/
Score |
| Male knife holder: |
Dovetail mount pneumatic lower and side
loading |
| Female knife shaft: |
Driven 80mm diameter chrome, ground shaft
for 105mm diameter knives |
| Minimum slit width: |
40mm (20mm with top and bottom driven
knife shafts) |
| Kiss slit rollers: |
2x rollers fitted for tangential shear
and razor in air slitting. The rear roller is fixed and the
front roller is driven and removable, a nip drive on the front
roller ensures control of narrow trims |
| Trim removal: |
Venturi blower vacuum system or dual oscillating
trim winders |
Rewind section
| Rewind motors: |
2x 7.5Kw A/C Vector type |
| Rewind type: |
Duplex cantilevered |
| Maximum roll diameter: |
800mm |
| Core size: |
Nominal 76mm |
| Shafts type: |
SRC full differential slip type |
| Tension control: |
Independent automatic load-cell control
of each rewind shaft |
| Tension range: |
0.5 – 5Newtons / cm |
| Taper tension: |
SRC software selectable automatic / manual
or max diameter taper tension control |
| Lay-on arms: |
Software controlled automatic pneumatic
contact control, with dual rollers or constant gap/ contact
control electric actuator arms |
| Lay-on arms supplied: |
2x full width arms with rubber covered
front roller |
| Maximum weight per
shaft: |
400Kg |
Electrical equipment
| Operator controls: |
Full colour touch screen with job data
memory recall system |
| Drives: |
Omron/ Siemens/ Allen Bradley |
| Control Gear: |
Telemecanique |
| PLC system: |
Allen Bradley 503 upwards/ Siemens |
|
