TTR modals available: |
|
TTR Slitter
Product highlights
- The Thermal Transfer Ribbon (TTR) slitter is compact and easy
to install.
- Fully automatic loadcell tension control throughout.
- Razor slitting in air or in groove.
- Full colour touch screen with 1000 job data memory recall
system.
- Leader trailor splice table with automatic web feed.
- Dual oscillating trim winders.
See the TTR Slitter in action!
NOTE you must obtain
a username & password from us to view this
movie: contact us
Click the image to view movie.
ttr1_src2.mov - 5mins, 24mb
|
Specification
Unwind
| Unwind type: |
Shaftless |
| Maximum roll diameter: |
600mm |
| Maximum roll width: |
1000mm |
| Brake: |
Multi puck pneumatic type |
| Tension control: |
Loadcell |
| Leader trailer table: |
Size to suit customer requirements with
pneumatic clamps & suction |
| Nip Drive: |
Main drive roller with pneumatically loaded
rubber nip |
| Maximum machine speed: |
500mpm |
| Dual counters: |
Finished roll length & leader forward |
| Slitting: |
Razor |
| Minimum slit width: |
8mm with comb |
Rewind
| Rewind type: |
Dual manual turret |
| Maximum roll diameter: |
152mm |
| Maximum roll width: |
1000mm |
| Rewind shafts minimum
diameter: |
12.5mm |
| Rewind shafts type: |
Air shafts |
| Rewind tension: |
Loadcell control |
| Trim extraction: |
Dual trim winders with speed related oscillation |
|
TTR 168
Product highlights
- Shaftless / jumbo roll loaded at same side as rewind
- Tension control maintains tension during leader insertion
- Splice table fitted with height adjustment to help jumbo rolls with loose edge
|
Specification:
Unwind
| Unwind type: |
Shaftless / jumbo roll loaded at same side as rewind |
| Core size: |
6” |
| Parent roll support arms movement: |
Ball screw |
| Maximum roll diameter: |
600mm |
| Maximum material width: |
1010mm |
| Tension control: |
Driven using servo motor via Pneumatic dancer arm (maintains tension during leader insertion) |
| Tension range: |
20- 160 Newtons |
| Cam roller: |
First roller before splice table fitted with height adjustment to help jumbo rolls with loose edge |
| Leader trailer table: |
3 x individual adjustable shafts with tension adjustment |
| Maximum leader trailer length: |
1000mm |
| Tape dispenses: |
4 x low friction with individual tension control |
| Leader material insertion: |
Foot pedal activated, timed length |
| Splice table: |
2 x clamps easily adjustable on linear slide rails + 1 x slide support |
| Vacuum for clamps: |
Industrial vacuum pump |
| Slitting type: |
Razor comb |
| Minimum slit width: |
10mm |
| Trim removal: |
2 x oscillating winders |
Rewind
| Rewind type: |
Dual turret |
| Maximum roll diameter: |
150mm |
| Core size: |
½” + 1” |
| Shafts supplied: |
4 x 1” |
| Shaft supports: |
4 x 1” (individual for the 2 shaft sizes for easy fast changeover) |
| Machine speed: |
0 - 500 metres / min |
| Machine acceleration: |
0 - 500 metres / min in under 20 sec (no restricted speed for small diameter) |
| All electronic motor control uses precision servo control with ProfiBus connection to Siemens S7-300 PLC |
|
TTR Mini
Product highlights
- Now you can have Thermal Transfer Ribbon (TTR) slitting in
mini format!
- Fully automatic tension control
- Razor slitting in air (comb), multiple materials up to 300mm
wide
Materials:
- Thermal Ribbon
- Wax, Resin, Wax Resin
- Hot Stamping Foils
|
Technical Specification:
| Rewind type: |
Dual cantilevered |
| Rewind core size: |
1/2" & 1" |
| Max Material width: |
150mm & 300mm |
| Max rewind diameter: |
150mm |
| Max unwind diameter: |
150mm |
| Lay on: |
Dual pivoting gravity weighted |
| Slitting system: |
Razor in air (comb) |
| Max machine speed: |
150 mts/min |
| Tension control: |
Fully automatic |
| Operator interface: |
5.6" HMI touch screen |
 
|
